Lunamoon Cover Base nr33 ,13ml

Cover Base №33 is an elastic base with pigment particles and glitter for coating and leveling nails.

Features:

• Features:
  • Not suitable for leveling long nails without prior reinforcement.
  • High coverage level of the natural nail due to high pigmentation.
  • Hypoallergenic and has a neutral odor.
  • Cure time in the lamp is 120 seconds.
  • Can be additionally heated to make the consistency even thinner.
  • May provide minimal shrinkage during wear due to its elasticity.
  • Requires an underlay of Rubber base
  • Weakly acidic, with a pH of 5-6.
  • Cure lamp power requirement: 36 – 48 W. It must be an original lamp only.
  • Easily removed by filing or liquid.
  • Provides wearability without detachment for 3-4 weeks.
  • Elastic and flexible.
  • The main rule for leveling is that the thickness should be 0.5 mm.
  • Thixotropic – becomes thinner during application with brush movements.
  • It does not spread and quickly self-levels.
  • Medium consistency, self-leveling.

Application method:
1. Removal.
2. We do not dust the shape of the nail. Or we leave a spare 2 mm of length, which we dust and take away after leveling.
3. With a file of 220 grit, file the nail from above without strong pressure, lifting the scales of the nail plate, or use a buff of 100 grit.
4. Manicure.
5. If you work with removers, you need to wash your hands with soap and water after using them.
6. Nail degreasing. It is necessary to make two approaches. We use 4 napkins. One napkin for 5 fingers. The first approach is to wipe the surface of the nail. The second approach is to take an orange stick, put on a napkin and wipe everything in the cuticle area and in the sinuses.
7. Dehydrator (optional)
8. We use the primer as desired. But if the base for the substrate has sufficient acidity, then a primer is not needed.
9. Lining with Rubber base Lunamoon. Best applied with a flat gel brush. Movements should be rubbing. It is important to draw all sinuses of the nail. Dry for 30 seconds.
10. Wipe off stickiness.
11. Alignment. Dry in a lamp for 120 seconds.
12. Dusting of the form after alignment. This is necessary so that a thickness is formed on the end that will hold the free edge.
13. After sawing, we wipe off the stickiness.
14. Apply top coat and dry for 120 seconds. After drying, do not wipe with anything, because the shine may be lost